香港天下彩票免费资料|3肖中10元赔多少

20kV电力变压器 S11-M系列

2-.jpg

型号及含义
Brief introduction to the products

未标题-3.jpg

产品简介
Brief introduction to the products

S11型三相油浸密封式配电变压器,具有节能环保、工艺先进、结构新颖、外形美观等特点,可作为原“S9”型变压器的更新换代产品,适用于10 kV级或20 kV级50Hz的配电系统。

S11 Three Phase Oil Immersed Sealed Distribution Transformer has the features of saving energy and protecting environment, advanced technology, novel structure, beautiful appearance and so on. It is the upgraded product as the original type “S9” transformer which is suitable for 10kV class or 20kV class 50Hz distribution system.

产品结构
Product Structure

铁心:选用优质冷轧硅钢片和多组全斜接缝步进搭接、绑扎结构,有效的改善了磁通密度在铁心内部的分布状况,满足变压器低损耗和低噪声的节能环保要求。

绕组:选用优质无氧铜材/高强度漆包线(或纸包线)卷绕和多层圆筒式(或饼式/螺旋式)结构,安匝分布均匀,绝缘结构合理。高压绕组和低压绕组可采用联体绕制,效率高,线圈紧实。并通过优化冷却、散热/温升设计,对绕组线匝进行绑扎、夹紧和对绕组端部用层压木压实,以增强绕组机械强度和短路承受能力,确保变压器安全可靠地运行。

器身:采用免吊芯和器身四周限位及吊板结构,有效地解决了器身悬空问题,器身?#25442;?#20301;移,避免了运输颠簸对产品质量的不利影响;器身所使用的紧固件均采用?#36816;?#34746;母,能保证长途运输后不至于松?#36873;?#22240;此,新产品在?#23545;?#21069;无需检查。

油箱:选用波纹油箱或膨胀式散热器油箱结构,免维修、无渗漏、体积小、散热好、结构新?#20445;?#21462;消了储油柜及吸湿器,油体积的变化依靠波纹油箱波纹片或膨胀式散热器的弹性来补偿、调节,随着温度升高/降低、变压器绝缘油的增减而胀缩,同时使变压器内部与空气隔离,变压器绝缘油不与氧气和水份接触,减缓绝缘油和纸等材?#31995;?#32769;化速度,可延长产品使用寿命。并且油箱密封处采用耐油硅胶密封件,不易老化、开裂,使用多年无需更换。然而,新产品运?#24418;?#25252;简单,为用户节省了停电维护的费用。

表面处理与涂层:零部件、油箱表面经磷化处理后用三防漆(防潮、防霉、防盐雾)喷涂,可以满足各种不同的使用环境,保证表面处理涂层不脱落、无锈蚀,色泽新?#30465;?#20809;亮,外形美观。


Iron core: it chooses the high-quality cold-rolled silicon steel sheets and multi groups entire ramp lap joints, banding structure. It effectively improved the distribution of the magnetic flux density within the iron core, and it met the requirements of low loss, low noise, energy saving and environmental protection of the transformer.

Winding: it chooses the high quality non-oxygen copper materials/ high strength enamelled wire (or paper-covered wire) winding and multilayer cylinder structure, even distributing ampere turns and reasonable insulation structure. High and low voltage windings can adopt the union winding, so the efficiency is high with the coil compaction. And by optimizing and cooling, heat dissipation/ temperature rise design, turn on the winding line for banding, clamping, and by the end of the winding wood laminate compaction, in order to enhance mechanical strength and short-circuit winding capacity, to ensure safe and reliable operation of the transformer.

Body: it adopts the structure of suspended core free and spacing around the body and hanging board, so that it solved the problem of body hanging in the air and the body can’t displace, at the same time, it avoided the bad impact to the product’s quality of the bumps on the transportation; The fastener using in the body adopts the locknut which can guarantee it wont get loose on the long distance transportation. Therefore, the new product is no need for inspection before putting into operation.

Tank: to choose the structure of corrugated tank or radiator expansion tank, maintenance-free, non-leaking, small size, good heat dissipation, novel structure, while canceling the oil storage tank and the moisture absorber, the changing of oil volume is regulating by the corrugated tank plates or the flexibility of radiator expansion tank. As the temperature is raised/ reduced, the increase or decrease in the transformer insulation oil is expansion or contraction, at the same time, it separates the transformer inside with the air, the transformer insulating oil does not touch with the oxygen and water, so that it will reduce the aging speed of insulating oil and paper materials to extend the using life of the product. Besides this, the seal of the tank adopts the oil proof silica gel seal parts, it is resistant to aging and crack, so that it can be used for many years without replacement. However, the operation and maintenance of the new product is simple, it is saving the cost of maintenance of power for the customers.

Surface treatment and coatings: the spare parts and tank surface are spray painting by three anti-paints (anti-damp, anti-rot, anti-salt fog) after phosphating, to meet a variety of use of the environment and to ensure that the coating surface treatment does not fall off, no rust, the color is fresh, bright, beautiful appearance.


?#38469;醪问?br/>Product Structure

未标题-4.jpg


订货须知
ordering Information

订货方在订货时应给本公司提供与产品有关的下列数据

1. 型号规格

2. 额定容量

3. 相数

4. 频率

5. 电压组合/分接范围

6. 联结组标号

7. 短路阻抗

8. 油箱结构/冷却方式

9. 其它特殊要求/使用条件


In order to serve you better, please offer the following parameters when you are choosing our products.

1. Type 

2. Rated Capacity      

3. Phase No.     

4. Frequency

5. Voltage Combination/ Tapping Range    

6. Union Symbol    

7. Short Circuit Impedance

8. Tank Structure/ Cooling Model     

9. Other Special Requests/ Conditions of Use


    香港天下彩票免费资料